Cookie Img
Send Inquiry Send SMS
Home » Products » Solar Meter » Solarmeter Model 8.0 UV Meter UVC

Solarmeter Model 8.0 UV Meter UVC

 Solarmeter Model 8.0 UV Meter UVC
Solarmeter Model 8.0 UV Meter UVC
Send Inquiry
Product Code : SM_8
Product Description

Features

  • Integral Sensor

  • Compact

  • Durable

  • Accurate

  • LCD readout

Applications

  • Lamp UVC Intensity & Aging

  • Eye wear UV block comparison

  • UVC Lamp Box Leak Check
Solar meter Specifications
Radiometer
Model 8.0
Irrad. Range 0-1999 µW/cm² UVC
Response 254 ± 8 nm
Bandwidth 246-262 nm
Resolution 1 UW/cm²
Conv. Rate 3.0 Readings/Sec
Display 3.5 Digit LCD
Digit Size 0.4 inch high
Oper. Humid. 5% TO 90% RH
Accuracy ±10% REF.NIST
Dimensions (in.) 4.2L x 2.4W x 0.9D (inches)
Weight 4.5 OZ. (incl. batt.)
Power Source 9-Volt DC Battery
Lens UV Glass
Diffuser None
Detector SiC/Shortpass I.F.

Sensor/Detector
Silicon Carbide (SIC) Photodiode packaged in hermetically sealed UV glass window cap.
Interference filter blocks UVA and UVB from response as show on Spectral Sensitivity Graph.

Operation

Press and hold push-button switch on face of unit. Aim sensor window in top panel of meter directly at UV source. Note reading on LCD and record if desired.

Battery operation voltage is 9V down to 6.5V. Below 6.5V the LCD numbers will begin to dim, indicating the need for battery replacement. Under "typical" service load, the battery should last about 2 years.

Proper Usage of Solar meter ® Ultraviolet Radiometer for Lamp Tests

  • Wear UV-block eye, face, hand protection when checking UVC lamps.

  • Allow lamps to warm-up prior to taking readings (at least 5 min).

  • Hold sensor close to lamp to measure individual lamp UVC intensity. Hold sensor at distance from lamp(s) for effective sterilization intensity.

  • When checking aging of lamps, keep measuring distance and locations constant.

  • Lamps should be replaced when output drops to about 70% of their original (new) readings.

  • If unsure of what original new values were, replace a lamp with new one and compare old one.

  • Do not subject the meter to extremes in temperature, humidity, shock or dust.

  • Use a dry, soft cloth to clean the instrument. Keep sensor free of oil, dirt, etc.

VECTOR TECHNOLOGIES
X


No. 001, Priya Enclave, Beside E-Seva, Road No. 9, Snehapuri Colony, Nacharam, Hyderabad - 500076, Telangana, India
Phone :+917259709563
Fax :91-40-27170188
Mr. M.R. V. Prasad (Chief Consultant)
Mobile :+917259709563
Send Inquiry Send SMS