Cookie Img
Send Inquiry Send SMS
Home » Products » Kimo Instruments » Kimo Instruments » Solarimeter

Solarimeter

Solarimeter
Solarimeter
Send Inquiry
Product Code : SL 100
Product Description

Solarimeter

In addition to environmental applications, and face to development of renewable energy, SL 100 instrument allows to control on test or on site, equipment with thermal or photovoltaic sensors.

SL100 instrument is a portable instrument which can measure and display:
Instantaneous:

Irradiance or irradiation for spot check measures in W/m².

On a timed duration of measurement:

  • Max./min. values
  • Average value of irradiance
  • Accumulated energy or radiant exposure in Wh/m²


Data are saved when the instrument is stopped or in case of battery failure.
Its sensor is composed of a strained silicon cell, not very sensitive to the thermal changes. It absorbs the solar radiation through a diffusor and a correction filter. The output voltage of the sensor is related to the received radiation.

SL 100 instrument is mainly an efficient and easy-to-use instrument : with small size, it has a large display with a resolution of 64*128 pixels involving a very high electronic technology.

2 General information

2.1 Measured units
SL 100 instrument can process the energy intensity emitted by the solar radiation in a precise place of the earth .

Expression of the solar energy and associated units :
1. Irradiance is the solar radiant flow received by unit area, expressed in W/m².
2. The radiant exposure or global irradiation is the quantity of solar energy by unit area: it's the product of irradiance by the duration of irradiation, expressed in Wh/m²

2.2 Use
Solar radiation :

Among all solar radiations, (opposite draw)
SL 100 was designed to measure the sum of direct solar radiation and diffuse solar radiation, which constitutes global solar radiation. For any application, before, during and after the installation of solar thermal photovoltaic sensors, it's required to control means of measurement to obtain valid and coherent results. Means of use of the instrument has at least so much importance on the result than the quality of the instrument.

It is definitely necessary to take into account the influence of environment, in particular:

1. Position or direct correctly solar cell of SL 100 instrument , according to location of solar sensors or supports (roof, terrace...)
2. Avoid dark areas (present or to come)
3. Go away as much as possible from reflecting zones


The Kimo SL 100 provides analysis of sunshine for immediate, short and long- term periods.

Salient Features :

  • Instantaneous, average, min/max values, hold function
  • Spectral response from 400 to 1100 nm
  • Calculation of energetic exposure in Wh/m2
  • Solar irrigation measuring range: from 1 W/m2 to 1,300 W/m2
  • Energetic exposure measuring range from 1 Wh/m2 to 500 kWh/m2
  • Calibration certificate and data transfer software

Technical Details :

Solar irrigation



Sensor

Min

Max

Light

1.00 W/m²

1300.00 W/m²

Energetic exposure



Sensor

Min

Max

Light

1.00 Wh/m²

500.00 kWh/m²

Technical details :

Parameters

Light

Displays

Graphical display

Battery life

48 hours

Standards

2011/65/EU RoHS II

Power supply

3 piles LR3-AAA

Probe type

Built-in probe

Protective cover

No

Interchangeable module

No


Instrument Dimensions

Length

Width

Height

58.00 mm

120.00 mm

33.00 mm

Operating temperature

Min

Max

-10.00 oC

50.00 oC

Storage temperature

Min

Max

-10.00 oC

55.00 oC

Supplied with

  • 1 Transport case with protective foam
  • 3 3 LR3-AAA batteries
  • 1 User manual
  • 1 Calibration certificate



VECTOR TECHNOLOGIES
X


No. 001, Priya Enclave, Beside E-Seva, Road No. 9, Snehapuri Colony, Nacharam, Hyderabad - 500076, Telangana, India
Phone :+917259709563
Fax :91-40-27170188
Mr. M.R. V. Prasad (Chief Consultant)
Mobile :+917259709563
Send Inquiry Send SMS