Air Quality

Product Description

Air Quality

PERFOM A MEASUREMENT
     Turn on the device by pressing on  On/Off/Esc.
      The device displays its name  AQ110 .
      When it turns on, the device performs a pre-heating phase. This phase lasts 10 seconds. The count of this pre-heating time
      displays on screen.
      The measure probe must be left to the open-air during this pre-heating phase.
     Put the probe to the required location.
      The device displays the CO2 and temperature measurements.
FREEZE THE MEASUREMENT
  During the measurement :
     Press on  Hold/min/max  to freeze the measurement.
       Hold  appears on the screen and the measurements are frozen.
     Press on  On/Off/Esc  to exit the hold function.
      The device returns to the measurements display.
DISPLAY THE MINIMUM AND THE MAXIMUM
   Once the measurement is frozen :
      Press on  Hol/min/max .
       The device displays the maximum value of CO measured since the last questioning at the top of the screen and the minimum
       value of CO measured since the last questioning at the bottom of the screen.
  
       Press again on  Hold/min/max .
       The device displays the maximum value of temperature measured since the last questioning at the top of the screen and the
       minimum value of temperature measured since the last questioning at the bottom of the screen.
      Press on  On/Off/Esc  to return to the measurements display.
ADJUST THE DEVICE
 
       The device drop-down menu
                    SEL.                                    SEL.                                SEL.                                  SEL.
  1x  Select               UNIT         2x   Select              AUTO         3x   Select             BEEP        4x   Select             P_ATM
                                                                OFF                                                                      900
                              C                                   OFF                                   ON                                  hPa
   Select the measuring unit in temperature
   The device is on and displays the measurements.
  
       Press on  Select .
        UNIT  blinks on screen.
  
       Press on  OK .
       The unit currently used blinks at the bottom of the screen.
  
       Press on  Select  until the required unit appears : C or F.
      Press on  OK  to validate.
        UNIT  blinks on screen.
      Press on  On/Off/Esc to return to the measurements display.
                          SEL.                                                                                             SEL.
       1x   Select              UNIT           OK
                                                                 UNIT         Select               UNIT         OK                UNIT
                                                          SEL.                              SEL.
                                   C                               C                           C / F                              F
                                                                                                                  1416
                                                                                                                  PPm           On/Off/
                                                                                                                                  Esc
                                                                                                                 77.6
                                                                                                                     F
   Adjust the auto shut-off
   The device is on and displays the measurements.
  
       Press on  Select  until  AUTO OFF  blinks on screen.
      Press on  OK , the time before device auto shut-off blinks at the bottom of the screen.
  
       Press on  Select  to select the time before device auto shut-off : 15, 30, 45, 60, 75, 90, 105, 120 minutes or OFF.
      Press on  OK to validate.
        AUTO OFF blinks on screen.
      Press on  On/Off/Esc to return to the measurements display.
                         SEL.                                                                                           SEL.
                               AUTO                           AUTO                             AUTO                           AUTO
       2x    Select                           OK                            Select                           OK
                              OFF                            OFF                              OFF                           OFF
                                 OFF                            OFF                       15 / 30mn...                         30mn
                                                                                                             1416
                                                                                                             PPm            On/Off/
                                                                                                            25.6              Esc
                                                                                                                C
   Activate or deactivate the keys beep
   The device is on and displays the measurement.
  
       Press on  Select  until  BEEP  blinks on screen.
      Press on  OK .
        OFF  or  ON  blinks on screen.
      Press on  Select  to activate the keys beep  ON  or deactivate it  OFF .
  
       Press on  OK  to validate.
        BEEP  blinks on screen.
  
       Press on  On/Off/Esc  to return to the measurements display.
                             SEL.                                                                                       SEL.
         3x   Select              BEEP           OK              BEEP         Select             BEEP                         BEEP
                                                                                                              OK
                                                            SEL.                            SEL.
                                     ON                             ON                        OFF / ON                         OFF
                                                                                                              1416
                                                                                                              PPm          On/Off/
                                                                                                                            Esc
                                                                                                             25.6
                                                                                                                 C
   Adjust the atmospheric pressure
   To have a precise and representative measurement, the atmospheric pressure of the place where the measurements are performed
   must be entered in the device.
   The device is on and displays the measurements.
  
       Press on  Select  until  P_ATM  blinks on screen.
      Press on  OK .
       The first digit of the atmospheric pressure blinks on screen. The atmospheric pressure is between 800 and 1200h Pa.
      Press on Select to select the first digit value and press on  OK  to validate.
       The following digit blinks on screen.
      Perform the same procedure for the following digits (press on  On/Off/Hold  to return to the previous digit).
  
       Press on  OK  when the last digit is adjusted.
        P_ATM  blinks on screen.
  
       Press on  On/Off/Esc to return to the measurements display.
ACTIVATE THE BACKLIGHT
   The device is on and displays the measurements.
      Press on  Backlight  :       to activate the backlight.
  
       To deactivate it press again on  Backlight .
CHANGE THE BATTERIES
   Remove the front part at the back of the device.
   Change the old batteries by AAA LR03 1.5V batteries.
  Replace the front part.