Send Inquiry

Request To Call Back

CO2ST Sensors

Get a Price/Quote

CO2ST Sensors Specification

Resistance
< 100 Ohms

Output
Analog Voltage

Theory
NDIR (Non Dispersive Infrared)

Type
CO2ST Sensor

Accuracy
50ppm 5% of reading

Operating Voltage
5V DC

Output Voltage
0.4V to 2.0V

Compensated Temperature
5C to 50C

Storage Temperature
-20C to 60C

Operating Temperature
0C to 50C

Current Consumption
< 50 mA

Dimensions
33 mm x 20 mm x 9 mm

Lifespan
> 10 years

Measurement Range
0 to 2000 ppm (expandable up to 5000 ppm upon request)

Response Time
< 2 Minutes

Humidity Range
0% to 95% RH non-condensing

Interface
3-pin/4-pin

Warm-Up Time
< 1 Minute

Weight
6g

About CO2ST Sensors

CO2ST Sensors:

Our domain expertise has enabled us to come up with quality CO2ST Sensors. The products we offer are designed and engineered under the notable guidance of our diligent professionals. Furthermore, our products are timely delivered at clients disposal, with the assistance of wide distribution network.

CO2 sensors allow you to measure carbon dioxide.

Kimo's CO2ST measures CO2.

Salient Features :

Range from 0 to 5000 ppm
10-digits LCD display
One RCR relay 3A/230 Vac
Red LED in front
Software or DIP switch configuration
Quick and easy mounting with the 1/4 turn system with wall-mount plate

Technical details(active tab)

Measure details

Alarm : Red led in front and internal buzzer

Sensor	Min	Max
CO2	0.00 ppm	5000.00 ppm

Technical details :

Parameters	CO2
Displays	1-line display
IP Protection	IP 20
Standards	2011/65/EU RoHS II 2012/19/EU WEEE 2014/30/EU EMC 2014/35/EU Low Voltage
Power supply	24 Vac/Vdc
Relay	1 RCR relay 3 A / 230 VAC
Ethernet communication	No
Modbus network	No

Instrument Dimensions :

Length	Width	Height	Weight
90.00 mm	41.00 mm	80.00 mm	138.00 g

Operating temperature :

Min	Max
0.00 C	50.00 C

Storage temperature :

Min	Max
-10.00 ^oC	70.00 ^oC

Supplied with

1 ABS plate (expect ambiant model)
1 Fiche technique

Advanced CO2 Monitoring

Harnessing NDIR (Non Dispersive Infrared) technology, the CO2ST Sensor ensures precise and reliable carbon dioxide measurements, essential for environmental monitoring and control. Its high accuracy and wide operating range make it well-suited for indoor air quality applications and industrial use alike.

Seamless Integration for Diverse Industries

Designed with a compact footprint and analog voltage output, this sensor integrates smoothly into existing systems. With a current consumption below 50 mA and compatibility with 3-pin and 4-pin interfaces, installation is straightforward for manufacturers, exporters, and service providers seeking scalable environmental solutions.

FAQs of CO2ST Sensors:

Q: How does the CO2ST Sensor measure carbon dioxide levels?

A: The CO2ST Sensor uses NDIR (Non Dispersive Infrared) technology to accurately detect CO2 concentrations. It measures the absorption of infrared light by carbon dioxide molecules, providing stable and reliable readings for a range of applications.

Q: What are the benefits of using the CO2ST Sensor in indoor air quality monitoring?

A: Deploying the CO2ST Sensor improves indoor air quality management by offering rapid and accurate CO2 measurement. Its quick response and warm-up times, combined with a long lifespan, provide consistent performance with minimal maintenance, benefiting both end-users and service providers.

Q: When should a CO2ST Sensor be recalibrated or replaced?

A: Thanks to its robust design and advanced NDIR detection, the sensor maintains accuracy for over 10 years under normal operating conditions. However, periodic calibration checks are recommended in critical environments or if accuracy issues are detected during use.

Q: Where can the CO2ST Sensor be used?

A: This sensor is versatile and suitable for installation in buildings, laboratories, agricultural settings, and industrial environments within the operating temperature range of 0C to 50C and non-condensing humidity up to 95% RH.

Q: What is the installation process for the CO2ST Sensor?

A: The sensor features a compact design and supports 3-pin or 4-pin connections, making integration straightforward. Connect to a 5V DC power supply, ensure correct pin alignment, and wire the analog voltage output (0.4V to 2.0V) to your monitoring system.

Q: Can the CO2ST Sensors measurement range be customized?

A: Yes, the standard measurement range is 0 to 2000 ppm, but it can be expanded up to 5000 ppm upon request. Contact your dealer, supplier, or manufacturer for customization options as needed for your applications.

Tell us about your requirement