Digital Manometer

About Digital Manometer

Digital Manometer

PERFORM A MEASUREMENT
     Turn on the device by pressing on  On/Off/Esc .
      The device displays its name  MP110 ,  MP111 ,  MP112  or  MP115 , then performs an autozero.
     Connect the pressure tubes.
      The device displays the pressure.

PERFORM AN AUTOZERO
The device is on and displays the pressure measurements.
     Press on  OK .
       Autozero  displays on screen, the device performs an autozero then returns to the measurements display.

FREEZE THE MEASUREMENT
During a measurement :
  Press on  Hold/min/max .
      Hold  appears on the screen and the measurements are frozen.
  Press on On/Off/Esc  to exit the hold function.
      The device returns to the measurement display.

DISPLAY THE MAXIMUM AND THE MINIMUM
    Once the measurement are frozen :
Press once on Hold/min/max .
    The device display the maximum value of pressure measured since the last questioning at the top of the screen and the minimum value of pressure measured since the last questioning at the bottom of the screen.
Press on  On/Off/Esc  to return to the measurement display.

Kimo offers a wide range of cleanroom products including the MP 110 / 111 / 112 / 115 Portable Differential Pressure Meter.

• Easy to use
• Adjustable backlight
• Hold function and min-max values
• Selection of units
• Manual autozero
• Calibration certificate

Technical details :

Technical details :

Supplied with :

• 1 Calibration certificate
• 1 Transport case
• 2 x 1 m of silicon tube 4 x 7 mm for MP 110 and MP 111
• 1 Embout inox 6 x 100 mm pour MP 110 et MP 111
• 2 x 1 m of crystal tube 4 x 6 mm for MP 112 and MP115
• 1 User manual