Mini Temperature Calibration Bath

Mini Temperature Calibration Bath

Product Details:


Product Description

Mini Temperature Calibration Bath:

Using a solid-state peltier heat-pump, the Mini Calibration Bath quickly cools to about 36°F below ambient (near 32°F) and heats to approximately 120°F. Immerse your thermometer and compare its reading to a traceable reference thermometer. Operation is easy. One button for Hot, one for Cold. Fill its reservoir with crushed ice and a little water, turn the Cold button on, and in a few moments you'll have an ice-bath ready for calibrations at a perfect 32.0°F (±0.06°F). Our tests show the bath will maintain the ice point at 32.0°F with a stability of at least ±0.5°F (±0.3°C )for over four hours. For hot temperatures, the bath will continue heating until it reaches approximately 120°F. A thermostat will hold the bath near that temperature to prevent over-heating. The bath is powered by an included AC adaptor.


Range 32°F (36°F below ambient) and 120°F (49°C)
Stability ±0.5°F (±0.3°C) short term (in a stable 20°C ambient temp.)
Bath/cup Capacity 300ml
Power Included AC adaptor.
Power Consumption Cooling: 20W - Heating: 18W


Enter Buying Requirement Details
Email Id
Mobile number

Back to top
trade india member
VECTOR TECHNOLOGIES All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.